How to login reset Linksys Wi-Fi Router password

login reset Linksys Wi-Fi Router password . You may want to reset your Linksys network router if you can’t remember the administrator’s password, you’ve forgotten the network’s wireless security key, or you need to troubleshoot connectivity issues.

First of all you need to know that there is a difference between resetting a router and rebooting a router. When you reboot your router that means you cycle the power to it. Resetting your Linksys router involves changing it back to its factory settings. Perhaps you have forgotten the password to your router and now you want to reset the password.

What you are required to do is reset the router back to its factory settings then you can use the default password to access your router.

 

We have researched a lot related to this issue ( How to login reset Linksys Wi-Fi Router password ) and come up with the uncomplicated solutions possible. What we are expecting from you is just understand each and every step mentioned below carefully and execute them. We assure you that your problem will definitely be solved. If you would like to know more about Linksys, then click on this link https://en.wikipedia.org/wiki/Linksys .

login reset Linksys Wi-Fi Router password

Troubleshooting steps works on the following Linksys Router Models.

 

  • Linksys – MAX-STREAM AC1900 Dual-Band Wireless Router with 4-Port Gigabit Ethernet Switch
  • Link – Velop Tri-Band Whole Home Wi-Fi System
  • Linksys – Max-Stream™ AC2200 Tri-Band Wi-Fi Router
  • Link – VELOP Wireless-AC2200 Whole Home Wi-Fi System
  • Linksys – AC1200 Dual-Band Wi-Fi Router
  • Link – EA9500 Max-Stream AC5400 Tri-Band Wi-Fi Router
  • Linksys – WRT32X AC3200 Dual-Band Wi-Fi Gaming Router with Killer Prioritization Engine
  • Link – Wireless-AC3200 Dual-Band Wi-Fi Router
  • Linksys – Max-Stream™ AC1750 Wi-Fi Router
  • Link – Wireless-AC1750 Dual-Band Wi-Fi Router
  • Linksys – Max-Stream™ AC4000 Tri-Band Wi-Fi Router
  • Link – Velop AC2200 Tri-Band Whole Home Wi-Fi System
  • Linksys – AC1600 802.11ac Smart Wi-Fi Router
  • Link – Dual-Band AC1900 Router with DOCSIS 3.0 Cable Modem

Resetting the Linksys router to factory defaults

If you can’t access Linksys router’s web-based setup page or forgot the router’s password, then you are required to reset the router to its default factory settings. To do this, you are supposed to press and hold the Reset button for 10 seconds.

NOTE: Resetting your Linksys router to its default factory settings will also reset your router’s password. Keep this thing in mind, The Linksys router’s default password is “admin” as for the username, just leave the field blank.

IMPORTANT: Make sure that the Power LED of the Linksys router is blinking when you press the Reset button. This indicates that your router is being reset properly.

NOTE: The location of the Reset button may vary for every Linksys router model. Older Linksys devices may require pressing and holding the Reset button for at least 30 seconds to complete the reset process.
After pressing the Reset button of your Linksys router, unplug and re-plug the router’s power adapter.

NOTE: The Power LED of the Linksys router will keep on blinking for a few seconds after resetting as it is still trying to stabilize. However, if the Power light not become solid after a minute, then you are required to powercycle (To know how to Powercycle your Linksys router, then move your cursor to this link and open it.  For further steps on how to resolve this issue, click on this link https://www.linksys.com/us/support-article?articleNum=133192 .

 

 

 

Resetting the router using the web-based setup page

Step 1: First of all access the Linksys router’s web-based setup page. To learn how, Follow the steps mentioned below.

  • Launch a web browser (For e.g. Google Chrome, Mozilla Firefox or Safari) and enter “192.168.1.1” in     the Address bar of the web browser, then press [Enter]. If the IP address does not work or if it has been changed, then in that case check your Linksys router’s IP address. For instructions, click on this link https://www.linksys.com/us/support-article?articleNum=132891 .
  • Now enter your login credentials on the fields provided. The default password is admin. In case if you changed or personalized your password, use that instead.
  • For Linksys Smart Wi-Fi Routers, the login page will appear differently. To learn how to access your Linksys Smart Wi-Fi through a web browser, click on this link https://www.linksys.com/us/support-article?articleNum=140973 .

If you are using the Linksys Velop Whole Home Mesh Wi-Fi System, click on this link https://www.linksys.com/us/support-article?articleNum=247426 for instructions on how to access its web interface.
NOTE: To learn how to access the web-based setup page on a Mac® computer, follow the below mentioned steps.

 

  • First of all launch a web browser such as Google Chrome, Mozilla Firefox or Safari.
  • Now you are required to enter the default IP address in the address bar and then press return.NOTE: The default IP address of Linksys routers is 192.168.1.1.

Enter your router’s Name and Password when prompted and click Log In to continue.

 

NOTE for Resetting the router using the web-based setup page

If you have not changed the name and password of your router, leave the Name field blank and enter “admin” in the Password field.

login reset Linksys Wi-Fi Router password

NOTE: If you are having difficulties accessing the Linksys router’s web-based setup page, click on this link for recommended solutions.
You should now be able to access your Linksys router’s web-based setup page using your Mac computer.

Step 2: Click on the Administration tab then click on the Factory Defaults sub-tab.
Step 3: Now under the Factory Defaults section, click on the Restore Factory Defaults button.
After resetting the Linksys router to its default settings, reconfigure it according to your Internet service. To learn how to reconfigure the Linksys router for Cable Internet connection, click on this link https://www.linksys.com/us/support-article?articleNum=142912 . If you have DSL connection, click on this link https://www.linksys.com/us/support-article?articleNum=140074 .
NOTE: The Power LED of the router will keep on blinking for a few seconds after resetting because it is still trying to stabilize. However, if the Power light still isn’t solid after a minute, then power-cycle  the Linksys router. For further steps on how to resolve this issue, go through this link https://www.linksys.com/us/support-article?articleNum=133192 .

 

 

Changing the Linksys router’s password

The Linksys router’s default Password is “admin”, as for the User name, you can leave the field blank. For security purposes, it is recommended to change the default password.

QUICK TIP: Changing the Linksys router’s password through the web-based setup page may prevent you from using the Linksys Connect software. However, if you have installed the latest version of the software, it will automatically prompt to enter the new password that you saved in the web-based setup page. To learn how to change the wireless network name and password using Linksys Connect, Follow the below mentioned steps.

  • First of all launch Linksys Connect.
  • Now on the main Linksys Connect window, select Router settings then click Change.
  • Afterwards under the Personalize section, click Change to modify your Linksys router’s name and  password.
  • A window will appear to confirm that you are changing your Linksys router name or password. Click Yes to continue.
  • On the Change router name and password screen, you are supposed to enter a name that you prefer to call your wireless network under the Router name field, then enter a password that is 8-63 characters long. When you’re done, click on Change.

NOTE for Changing the Linksys router’s password

It is recommended to create or update the Easy Setup Key right after completing the installation. This will allow you to save your security settings such as your wireless network name (SSID) and password so you can easily connect other devices to your network. To know how to create or update your Easy Setup Key, click on this link https://www.linksys.com/us/support-article?articleNum=139234 .

Step 1: Access the router’s web-based setup page. To Know how, Follow the below mentioned steps.

  • Launch a web browser (For e.g. Google Chrome, Mozilla Firefox or Safari) and enter “192.168.1.1” in the Address bar of the web browser, then press [Enter]. If the IP address does not work or if it has been changed, then in that case check your Linksys router’s IP address. For instructions, click on this link https://www.linksys.com/us/support-article?articleNum=132891 .
  • Now enter your login credentials on the fields provided. The default password is admin. In case if you changed or personalized your password, use that instead.
  • For Linksys Smart Wi-Fi Routers, the login page will appear differently. To learn how to access your Linksys Smart Wi-Fi through a web browser, click on this link https://www.linksys.com/us/support-article?articleNum=140973 .

If you are using the Linksys Velop Whole Home Mesh Wi-Fi System, click on this link https://www.linksys.com/us/support-article?articleNum=247426 for instructions on how to access its web interface.

login reset Linksys Wi-Fi Router password

NOTE for Changing the Linksys router’s password

To learn how to access the web-based setup page on a Mac® computer, then follow the steps mentioned above.
Step 2: Furthermore now click on the Administration tab.
NOTE: The image may vary depending on the model number of your Linksys router.
Step 3: Afterwards under the Management section, enter the new password in the Router Password and Re-Enter to Confirm fields.
NOTE: Furthermore You may use a combination of letters and numbers for your router password. Make sure that you take note of your router password so that you may have a back-up in case you forget it.
Step 4: Finally Now you are supposed to click on the Save Settings.

IMPORTANT:

  • All the computers that are connected to the network will be using the new password when logging in to the router’s web-based setup page.
  • The Linksys router’s administrator User name and Password are different from the wireless network name (SSID) and passphrase of your wireless network.
  • If you want to know how to check the security settings of your network, click on this link https://www.linksys.com/us/support-article?articleNum=136246 ..
  • If you are still having issues changing or resetting the router’s administrative password, then you are required to upgrade the Linksys router’s firmware .
  • After performing the upgrade, go through the Resetting the Linksys router to factory defaults section again of this article.

We hope you find the information above helpful. We have tried our best to resolve your issue ( How to login reset Linksys Wi-Fi Router password ). “Follow Link To Do liksys Extender Setup

In case you find any difficulty in getting any step mentioned above then please do let us know. We will be glad to help you out. Our experts are always there for you not matter how small or complex your problem is.

Default Asked on 04/21/2018 in Linksys,   Router.

Thank you for sharing this post and I loved your article.

on 10/29/2018.

This article is very helpful for me to fix my problem and thank you for posting this article.

on 10/30/2018.
Add Comment
0 Answer(s)

Your Answer

By posting your answer, you agree to the privacy policy and terms of service.