Connect Brother Printer To WIFI . Are you getting any error or encountering issues every time you connect brother printer to Wifi and looking for a permanent solution to get rid of these? This article will help you know how to connect brother printer to Wifi successfully.
We have discussed Step by step procedure in this guide to help you carry out a proper connection setup. So, follow the methods listed down below carefully to connect brother printer to WiFi easily.
An Ultimate Guide To Connect Brother Printer To WiFi
Follow the below steps and instructions carefully.
First of all, you need to press the power button on your brother printer to turn it.
Also, don’t forget to Turn your Wifi router ON.
Now reset the wireless card by pressing the menu button on your brother printer and go to Network > Network Reset.
Now configure the network by pressing the menu button and then go to Network > WLAN > Setup Wizard.
Identify your network (SSID) and enter the network key and press OK button presented on your brother printer.
Step 6 to Connect Brother Printer
Now your brother printer will take a couple of minutes to connect your device to Wi-Fi. So, that’s it.
Also, please note that you don’t need to turn off either of both devices (brother printer or Wi-Fi router) during the connection setup.
After the connection setup, check that your brother printer is connected to Wi-Fi by sneaking into the screen display of your printing device.
If the connection setup is successful, make a command for print from your computer.
So, overall, it’s an easy job to Connect brother printer to Wi-Fi. However, a few users have reported that they are getting technical errors during the connection setup. So, let’s fixed those errors too.
The following list summarizes the connection setup errors along with the solutions.
Fixing Errors Of Brother Printer Connection Setup
1. Background applications Of Brother Printer
If you are getting technical issues in the connection setup, the background application may be responsible for the denied connection. So, this issue can be resolved by terminating all background processes.
Press Ctrl+Alt+Delete keys simultaneously and open task manager.
Press left click on the background applications and click on the “End Task” button, and restart your computer.
Once you have restarted your computer, try again for the connection setup.
2. Router location To Connect Brother Printer
Router location does not sound familiar for a connection setup error, but, anything covering your Wi-Fi router may cause failure in connecting your brother printer. So, make sure that your router is near to your brother printer. Otherwise, the printer will not be able to add a network.
3. Update brother printer drivers
Most of the brother printers need drivers for printing. Also, Outdated drivers may seem to overkill the connection setup and often require the latest version of drivers. So, follow the below instruction if that’s the case with you.
Go to: Start > Device manager > Printers > Update drivers.
Once the driver is updated successfully, restart your computer.
Try the connection setup.
So, that’s everything you should be aware of to connect brother printer to Wi-Fi. We hope you’ve enjoyed reading this post and and now you know How To Connect Brother Printer To WIFI. Also, read “Easy & Best HP Printer troubleshooting steps” and “How to Reset Medialink Router.” If you have any queries, let us know in the comment section. Thanks for reading this post here at techsupportforum247.